907.34 € be PVM
A safe connection between vessel and shore installation is an essential part of your electrical system. A galvanic electrical isolation between shore power and the on board power prevents any electrical corrosion of metal parts while keeping you earthed.
The Mass GI is supplied with the latest high-frequency switching technology as well as Soft Start for peak loads when connecting to the grid. LED lights on the casing indicate load and overload. The transformer can be remote controlled. The Mass GI is 75 % lighter and 60 % smaller than to low frequency transformers.
Parallel switching of the Mass GI units increases the AC power capacity. Two 16 A/3.5 kW units ensures 32 A/7 kW, four units give 64 A/14 kW.
With its robust aluminium casing, this isolation transformer can be fitted in any position on wall or floor. No rubber mountings are necessary because the unit does not vibrate or hum. The Mass GI also features professional connections with strain relief cable glands.
|Output voltage (± 5 %)||90-255 V|
|Output frequency range||45-65 Hz|
|Input voltage range||90-255 V|
|Input frequency range||45-65 Hz|
|Nominal input current (230 V)||16 A|
|Efficiency||> 93 %|
|Power 230 V (120 V)||3500 VA (1920) VA|
|Parallel configuration||to 4 units parallel (= 14 kW)|
|Dimensions, hxwxd||340 x 261 x 144 mm
13.4 x 10.3 x 5.7 inch
|Earth leakage protection||no|
|No-load power consumption||22 W|
|Temperature range (ambient temp.)||0 °C to 40 °C, derating power > 40 °C
32 °F to 104 °F
|Switch off at||80 °C|
|Operating humidity||max. 95 %|
|Switch off behaviour breaker||B-characteristic|